Hanna Primo TDS Tester (716833)
The Primo TDS tester provides a fast and dependable way to measure the Total Dissolved Solids in your water samples. It is ideally suited for the rigorous demands of water quality professionals, who will appreciate the practicality of Primo's easy-to-read LCD when demonstrating the before and after results of conditioning and filtration systems. Temperature is compensated automatically to ensure the readings are consistent to the standard or reference temperature.
Operating and routine maintenance has never been easier. Primo TDS uses a single button at the top of the meter. Press it once and the meter is powered and ready for use. Press and hold the button for a few seconds and Primo automatically enters calibration mode. Simply open a sachet of the calibration solution, dip the probe and within seconds the meter recognizes the calibration solution and calibrates itself! Maximum battery life is managed by Primo's power microprocessor, which automatically turns it of after 5 minutes.
People Who Bought This Also Bought:
Only: $37.54 |
Only: $37.19 |
Only: $21.51 |
Only: $2.97 |
Only: $49.60 |
Only: $19.08 |
Only: $144.62 |
Only: $2.35 |
Only: $79.97 |
Only: $231.27 |
Only: $44.69 |
Only: $29.19 |
Related Products
- Bluelab – PPM Pen (716482)
- Bluelab - pH Pen (716480)
- Hanna PHEP Meter (Hi98107) (716840)
- HM Digital - HM Digital Water Resistant Ec/TDS Meter w/ Temperature in C/F Hydrotester (Model COM-80) (716145)
- Hanna Instruments - Hanna 7.01, 1500 ppm, and Cleaning Solution (716476)
- Hanna Instruments - Hanna 7.01, 1413 uS/cm, and Cleaning Solution (716474)
- Hanna Instruments - Hanna 4.01, 7.01, and Cleaning Solution (716472)
- Hanna Instruments - Hanna Cleaning Solution 16oz (716470)
- Hanna Instruments - Hanna Storage Solution 16oz (716468)
- Milwaukee EC / Conductivity Monitor / Range (716686)
- Milwaukee - Se600 Replacement Probe For MW802 (716617)
- Milwaukee (MA850) Replace.Probe/SM801 & SM802 (716616)