Fan Controllers

Grozone Controls - Garden Controls Fan Controller (703372)

Model: 703372

The Fan Controller automatically slows down or speeds up centrifugal fans to maintain the room temperature at a value corresponding to the day or night set points. Day and Night temperature set points: 50°F to 100°F.

$61.76

Grozone Controls - Garden Controls Cooling Thermostat (703371)

Model: 703371

The Cooling Thermostat controls cooling fans to maintain the room temperature at a value corresponding to the day or night set points. Day & Night Temperature Set Points: 50°F to 100°F (10°C to 38°C). 3-position slide switch to select differential: +/- 2°F: Fan will start 2°F above set point and will stop 2°F below set point, +/- 4°F: Fan will start 4°F above set point and will stop 4°F below set point and+/- 6°F: Fan will start 6°F above set point and will stop 6°F below set point.

$57.89

Titan Controls - Spartan Series Fan Speed Controller (702895)

Model: 702895

The Fan Speed Controller features: Day & night temperature settings from 50°F to 100°F, variable fan idle mode settings, LED output indicator light and an accurate external temperature probe. For use with carbon filters and air filter systems. Housed in a rust, dust and water resistant plastic chassis, this controller will function in the roughest environments. Ratings: 5 Amp/120 Volt/60 Hz.

$72.04

Titan Controls - Spartan Series Recycle Adjustable Timer (702896)

Model: 702896

The Recycle Adjustable Timer features: 1 minute to 60 minutes ‘ON’ time, 5 minute to 12 hour ‘OFF’ time, LED indicator light, and adjustable ‘ON’ modes for day, night or both use. For use with pumps, fans or CO2 systems. Housed in a rust, dust and water resistant plastic chassis, this controller will function in the toughest environments. Ratings: 12 Amp/120 Volt/60 Hz.

$54.84

Titan Controls - Spartan Series Cooling Controller (702897)

Model: 702897

The Fan Speed Controller features: Day & night temperature settings from 50°F to 100°F, variable fan idle mode settings, LED output indicator light and an accurate external temperature probe. For use with carbon filters and air filter systems. Housed in a rust, dust and water resistant plastic chassis, this controller will function in the roughest environments. Ratings: 5 Amp/120 Volt/60 Hz.

$59.78

Sentinel - AFC-1a Advanced Fan Controller (Plug Box Version) (AFC-1A PB)

Model: SNTAFC1APB

ETL listed Advanced Fan Controller available in Wall Mount or Plugbox configurations.

The AFC-1a Advanced Fan Controller is designed to control ventilation fans in gardens, greenhouses, grow rooms and other environments. By automatically increasing or decreasing the rotational velocity of fans depending upon temperature variations, more precise environmental control can be maintained than is possible with simpler thermostats.

$81.07

Sentinel - AFC-1a Advanced Fan Controller (Wallmount Version) (AFC-1A WM)

Model: SNTAFC1AWM

ETL listed Advanced Fan Controller available in Wall Mount or Plugbox configurations.

The AFC-1a Advanced Fan Controller is designed to control ventilation fans in gardens, greenhouses, grow rooms and other environments. By automatically increasing or decreasing the rotational velocity of fans depending upon temperature variations, more precise environmental control can be maintained than is possible with simpler thermostats.

$79.96

Hyper Fan - Speed Controller With 5 m Cable (701435)

Model: 701435

Hyper Fan Speed Controller can adjust the Hyper Fan™ from 35% to 100% airflow. It is detachable from the fan and independent from the power cord. Fan will automatically operate at full power when used without the supplied speed controller.

$19.12

Sentinel - BPC-1a Basic Photoperiod Controller (Plug Box Version) (BPC-1A PB) (703244)

Model: 703244

The BPC-1a comes in two versions, "Plug Box" and "Wall Mount" -- this version is the Plug Box/PB version.

$53.97

Sentinel - BPC-1a Basic Photoperiod Controller (Wall Mount Version) (BPC-1A WM) (703246)

Model: 703246

The BPC-1a comes in two versions, "Plug Box" and "Wall Mount" -- this version is the Wall Mount/WM version.

$68.54
Syndicate content